Endurance AL e

There’s no need to worry; being a pedal-assisted model means you are always in full control. When a power assist level is selected, the motor provides a little extra boost while pedalling. It does not take over.

No, pedal-assisted electric bikes do not require you to hold a valid driver’s licence, pay any road tax or take out insurance. Having some form of insurance on all bikes is always good practice.

You can test ride any of our e-bikes and receive expert buying advice at our flagship Clitheroe showroom. Please contact the showroom in advance so that we can ensure that any suitable bikes you wish to test are available for your visit. During the summer months, we also host demo events across the UK. For details of the dates and timings of these events, please refer to our events page.

Alternatively, you can hire the e-bike from E-Venture Bikes in Keswick; the rental cost will then be deducted from your purchase should you decide to buy one of our e-bikes.

To charge the Panasonic 36V/250Wh battery, plug the bike into a conventional household power socket using the supplied charger and cable. An optional range extender can also charge the main battery if a socket is not close at hand.

The electric components used on our e-bikes are IP54 rated. They can be used in inclement weather conditions and are protected against splashing, but not against full immersion or when subjected to pressurised water from a hose pipe or jet wash. When transporting the bike outside of a vehicle, a waterproof cover should be used to protect the electronic components from water damage during transportation.

The battery range of the Endurance AL e depends upon several factors, including rider weight, route profile, tyre pressures and temperature. A rider of 90kg, on a varied route including climbs, descents and flats can expect an average range of up to 60 miles. An optional range extender is also available for all our e-bikes, increasing the available range by 70%.

Yes, the battery can easily be removed through the bottom bracket shell by any MAHLE-certified technician. The press-fit bottom bracket must be removed to facilitate the removal of the battery.

Like any battery, the capacity will start to degrade after approximately 500 charging cycles. Please take some time to read our battery care blog in which we outline the best practices to ensure that your e-bike battery continues to function at optimal efficiency throughout its lifespan.

Yes, the government removed the £1000 ceiling, which now makes obtaining an e-bike on Cycle to Work more accessible and beneficial than ever.

Yes, all the cables are routed internally to keep everything neat and tidy, protect them from the elements and enhance aerodynamic efficiency.

There is clearance for 700x28mm tyres without mudguards or 25mm when fitted.

No, the Endurance AL e is not designed to accept a rear pannier rack and does not have the necessary mounting points for a rack.

Yes, there are eyelets on the frame and forks for the fitting of full coverage mudguards.

Two, one on the down tube and the other on the seat tube.

No, there is no cable routing for Shimano Di2 systems.

We recommend a total rider and bike weight of 120kgs.

The Endurance AL e takes a Press Fit BB86 style of the bottom bracket.

The internal diameter of the seat tube is 27.2mm.

The frame is compatible with flat mount disc brakes.

The front forks are fitted with a bolt thru-axle of dimensions 100/120/M12*P1.5, while the rear hub is a bolt-on design.

Due to the many different systems people use we do not supply pedals with bikes but you can find a great selection of pedals here.